https://approvedbycoach.com/bike-chain-cleaning-and-maintenance-ideas/Bike Chain Cleaning and Maintenance Ideas
  • Bike Chain Cleaning and Maintenance Ideas

    21 Apr 2020
    8273

    Remember: all information, content, and material of this website is just for informational purposes only and are not intended to serve as a substitute for the consultation, diagnosis, and/or medical treatment of a qualified physician or your healthcare provider/personal fitness trainer.

    LAVERA STEWART

    LAVERA STEWART

    Editor-in-Chief of the Gym Expert

    When you have a bicycle it’s very important to take care of it. Cleaning is probably the most obvious and important thing you could do. Because the dirt can affect the performance and the lifespan of your bicycle.

    The dirtiest parts of your bike are the chain and drivetrain, and today we’ll gonna help you learn how you can clean them.

    Harmful Effects of Having a Dirty Chain

    The dirty chain can have rather disastrous consequences on your bike, like:

    • Increased wear rate;
    • The chain links will become less flexible;
    • It can further wear derailleur assemblies and drivetrain cogs;
    • Impaired shifting performance.

    What You Need

    So to clean the dirty chain, you’re gonna need:

    • Rags
    • Lubricant
    • Cleaner fluid

    When Is the Best Time to Clean and Lube?

    The best time depends on how often you clean your bike – regularly or occasionally. So let’s take a look at both of these instances.

    Cleaning Your Bike Regularly

    If you’re doing the cleaning regularly, then you have to:

    1. Examine the chain by standing by the side of your bike and lift the back part of the wheel off the ground;
    2. Inspect the links while rotating the pedal with your free hand;
    3. Check if it has dirt build-up or if there are rust or tight connections;
    4. Examine if it still has enough lubrication;
    5. Listen for squeaks while riding;
    6. If the two conditions are observed, your chain requires spot-cleaning.

    Tips for Spot-Cleaning

    When is the Best Time to Clean and Lube
    • Brush the dirt out of the links using a firm brush. You can also use an old toothbrush.
    • Re-lubricate the links regularly with the right lubricant.
    • Remove excess lubricant by using a clean, dry rag. Don’t use too much oil, since it can attract even more dirt.
    • To clean the chain-link thoroughly, use a cleaning tool.
    • Connect it to your chain for deep cleaning.
    Park Tool
    Ultrafashs
    Corki
    Oumers
    Park Tool CG-2.4 Bicycle Chain and Drivetrain Cleaning Kit
    Ultrafashs Bike Chain Oil and Cleaner Set with Bicycle Degreaser Biodegradable,Wet Lubricant,Chain Scrubber Cleaning Brush Tool.Bike Lube(2oz),Degreaser(10 or 17oz).Bottle
    corki Bicycle Chain Cleaning Tool Set,Bike Chain Crankset Brush,Motorcycle Washer Cleaner Brush Tools
    Oumers Bike Clean Brush Kit, Motorcycle Bike Chain Cleaning Tools - Make Bicycle Crank/Tire/Sprocket/Corner Stain Dirt Clean - Durable/Practical Cycling Clean Tool fit All Bike
    $37.95
    Price not available
    $7.99
    $11.99
    -
    -
    -
    -
    -
    -
    -
    -
    Park Tool
    Park Tool CG-2.4 Bicycle Chain and Drivetrain Cleaning Kit
    $37.95
    -
    -
    Ultrafashs
    Ultrafashs Bike Chain Oil and Cleaner Set with Bicycle Degreaser Biodegradable,Wet Lubricant,Chain Scrubber Cleaning Brush Tool.Bike Lube(2oz),Degreaser(10 or 17oz).Bottle
    Price not available
    -
    -
    Corki
    corki Bicycle Chain Cleaning Tool Set,Bike Chain Crankset Brush,Motorcycle Washer Cleaner Brush Tools
    $7.99
    -
    -
    Oumers
    Oumers Bike Clean Brush Kit, Motorcycle Bike Chain Cleaning Tools - Make Bicycle Crank/Tire/Sprocket/Corner Stain Dirt Clean - Durable/Practical Cycling Clean Tool fit All Bike
    $11.99
    -
    -

    Cleaning Your Bicycle Occasionally

    If you are cleaning your bike occasionally, like every few months then you have to:

    1. Remove your chain entirely with the use of a chain-removal tool.
    2. Clean it thoroughly using a brush and immerse it in a solvent. This process will remove the grime that has build-up on the chain, which cannot be removed by simply brushing it.
    3. Soak the chain until all the dirt has been freed from the bushings and links.
    4. Dry the entire chain completely using a clean rag.
    5. Before re-lubricating and re-installing the chain, make sure that the solvent has completely evaporated.

    Tip: Apply a minimum amount of lube, particularly on the inner link rollers only. There is no need to do it for other parts, and that will just waste the lube. Also, don’t use spray or straw when applying the lube. Because if you do this, you will only spread the lube in the frame, floor, and breaks.

    When buying a lubricant, it’s best to buy one in a dropper bottle, as you can then apply the lube one drop at a time.

    Once you are done with lubricating, ride the bicycle for a few minutes. Also, remember to remove the excess lube and the spread lube with a rag. And wipe the chainrings and sprockets dry as well. By doing this, you will have the necessary amount of lube to help the bicycle perform at its best.

    About Lubricants

    The lubricant has two fundamental properties. One is that it reduces or eliminates the accumulated dirt because it speeds up the wear. The second is that it makes the chain durable. Without enough lubrication, your bike chain will wear out fast.

    Issues You Will Encounter When Cleaning Your Bike

    IIf you’re concerned about the durability of your bike’s chain, it’s best to lube it often. Lubricants marketed as bicycle-chain lubricants are superior to non-bicycle specific products. These oils usually contain Teflon and are made to repel water and dirt.

    Also, remember to use only the designated lubricant and cleaner for bicycle drivetrains.

    Tri-Flow
    Pro Gold
    Finish Line
    DuPont
    Tri-Flow TF0021060 Superior Lubricant Drip Bottle- 6 oz
    Pro Gold Products ProGold ProLink Chain Lube, 4oz
    Finish Line 1-Step Bicycle Chain Cleaner & Lubricant 4oz Squeeze Bottle
    DuPont Teflon Chain-Saver Dry Self-Cleaning Lubricant, 11-Ounce
    $10.61
    $9.50
    $9.58
    Price not available
    -
    -
    -
    -
    Tri-Flow
    Tri-Flow TF0021060 Superior Lubricant Drip Bottle- 6 oz
    $10.61
    -
    Pro Gold
    Pro Gold Products ProGold ProLink Chain Lube, 4oz
    $9.50
    -
    Finish Line
    Finish Line 1-Step Bicycle Chain Cleaner & Lubricant 4oz Squeeze Bottle
    $9.58
    -
    DuPont
    DuPont Teflon Chain-Saver Dry Self-Cleaning Lubricant, 11-Ounce
    Price not available
    -

    Issues You Will Encounter When Cleaning Your Bike

    Before cleaning you need to examine your bike.

    Tight Links

    If you notice your links are not bending smoothly, then you have “tight links.” Such links are caused by corrosion or dirt between the link plates. And while cleaning them can be rather tiresome, you can still get rid of them by cleaning, lubricating and flexing it back and forth. Improper pin installation is yet another reason for this issue, and it may lead to severe chain damage.

    To put the link back into its right position, you can shift them back and forth within their chainplates by using a tool or with your hands. Replace the chains if the damage is irreversible.

    Chain Stretch

    If you notice the chain has become longer, it means you have a chain stretch. It hasn’t stretched literally, just lengthened as it wears. And it appears between the link pins and the rollers. This results in free play or slop, which makes the gear skip in some instances. The bicycle’s rear cog teeth and chainrings will also get affected.Replacing a cog set is more expensive than replacing a chain. You can look for a wear-indicator tool to check on your chain wear. If the prong of the device fits into the chain, then it needs to be replaced.

    The Significance of Lubricating Your Bicycle Chain

    Aside from extending the life of your bike, keeping your bicycle chain lubricated has other benefits:

    It Keeps Your Bike Protected From The Elements

    Rain, road, climate salt, and snow can cause the chain to rust out. And it may become visible just after one week of riding in a wet environment. This is why it is essential to provide the right maintenance for your bicycle. Proper lubrication can keep your bike protected against corrosion and reduce the effect of environmental factors.

    Dirty Bike Chain

    The Chain Won’t Make Much Noise

    The first sign of having a dry chain is the sound it produces. Most of the time, the chain sound becomes louder. Check the bike’s chain with your hands to determine how dry, dirty, or wet it is. Proper lubrication can keep your bicycle in silent mode.

    Improves Shifting

    One of the indicators of bike performance is the way it shifts. Bad shifting will affect your speed and reduce your efficiency. Having a dry chain could be one of the reasons.

    Watts Savings

    A dry chain consumes 20 watts at 22 mph. Its consumption will be reduced to 5-10 watts after lubrication. As it becomes dirty and dry, the average watts being added is around 5-10 watts. You will save more energy if the bike chain is in good condition.

    And that’s about it! Hopefully, now you know how to clean and better take care of your bike. The more care is put into it, the more it will serve you well. So never neglect proper cleaning, and you will see the results of your hard work!


    • Please fill required fields
    • Please fill required fields
    • Please fill required fields
    • Send